IN STOCK CARBIDE TIPPED CIRCULAR SAW BLADES
SKARPAZ BRAND
SC1260T-12 X 60T 10TCG .095/.135 X 1” STANDARD CROSSCUT $126.80
An ideal all around cabinet maker blade. Clean cross cutting on all types of wood, particle board, plywood, and plastic laminated single sided panels. The triple chip design allows for a chip free cut.
CM1250-12 X 50T 15CMB .095/.135 X 1” COMBINATION $74.50
One blade that is designed to rip or cross cut. The best blade compromise when one blades needs to do both jobs. Delivers planer like finished cut.
P1060A-10 X 60T 0ATB .095/.090 X 5/8” PORTABLE MITER $89.00
O degree hook creates a safer tooth design for portable/sliding & radial arm miter saws. Leaves a clean cross cut on all wood types.
CM1050-10 X 50T 15CMB .095/.135 X 5/8” COMBINATION $64.00
One blade that is designed to rip or cross cut. The best blade compromise when one blades needs to do both jobs. Delivers a planer like finished cut.
ORION SERIES
OR1280AR-12 X 80T 5ATB+R .078/.110 X 1” SUPERIOR FINISH CROSSCUT $98.00
Application specific tooth geometries are used to produce a superior cut surface on both hard and soft woods. This blade can be used on table or miter saws with excellent results.
OR1260-12 X 60T 15CMB .085/.125 X 1” COMBINATION $86.00
One blade that is designed to rip or cross cut. The best blade compromise when one blades needs to do both jobs. Delivers a planer like finished cut.
OR1260AR-12 X 60T 5ATB+R .078/.110 X 1” SUPERIOR FINISH CROSSCUT $82.00
Application specific tooth geometries are used to produce a superior cut surface on both hard and soft woods. This blade can be used on table or miter saws with excellent results.
OR126NA-12 X 60T N5ATB .085/.115 X 1” SLIDING MITER/RADIAL ARM $72.00
-5 degree hook creates a safer tooth design for portable/sliding & radial arm miter saws. Leaves a clean cross cut on all wood types.
OR1080NA-10 X 80 NHIATB .085/.015 X 5/8” LAMINATES & VENEERS $82.35
Cut double sided laminates and veneers chip free without a scoring saw. A Negative hook angle plus a “high” alternate top angle are featured in this design.
OR1080AR-10 X 80T 5ATB+R .070/.100 X 5/8” SUPERIOR FINISH CROSSCUT $72.00
Application specific tooth geometries are used to produce a superior cut surface on both hard and soft woods. This blade can be used on table or miter saws with excellent results.
OR1024-10 X 24T 20FT .085/.125 X 5/8” RIP BLADE $42.00
Ripping of hard or soft woods. Suitable for both hand and power feed applications.
AGE SERIES BY AMANA TOOL
MD-16-600-16 X 60T 15ATB .138/.100 GENERAL PURPOSE $96.00
These are a general purpose blade which provides good results when ripping or crosscutting in a variety of materials.
MD14-360-14 x 36T 20ATB .138/.100 X 1” RIPPING $67.86
MD12-963-12 X 96T HIATB .126 X 1” DOUBLE SIDED MELAMINE $111.48
Blades are designed for cutting double-sided melamine and veneered sheet goods on saws without a scoring unit. The sharp 30 degree bevels slice cleanly through fragile coatings and laminates.
MD12-720-12 X 72T 12ATB .126/.071 CUT OFF & CROSS CUT $67.25
Blades are designed for smooth crosscuts in a variety of materials from hard or softwoods and sheet goods including chipboard.
MD10-606-10 X 60T 0ATB .090/.071 THIN KERF MITER/FINISHING $71.96
Blades are designed for smooth crosscuts in a variety of materials. Ideal for underpowered saws; thin kerf blades reduce waste in expensive materials and require less horsepower to operate.
MD10-601-10 X 60T 12TCG .126/.087 X 5/8” CROSSCUT PLYWOOD/LAM $60.90
Blades are designed for clean cuts in plywood, plastic laminates, single and double sided melamines. The greater number of teeth, triple chip grind, and 12 deg hook angle provide and excellent balance between feed resistance and finish.
MD10-400-10 X 40T 15ATB .126/.087 X 5/8” GENERAL PURPOSE $46.00
These are a general purpose blade which provides good results when ripping or crosscutting in a variety of materials.
MD10-600-10 X 60T 12ATB .126/.087 X 5/8” CROSSCUT $45.75
Blades are designed for smooth crosscuts in a variety of materials.
DEWALT PRO SERIES
120PT80-12 X 80T -5ATB SLIDING MITER BLADE $36.00
120PT6O-12 X 60T -5ATB SLIDING MITER BLADE $34.00
100PT60-10 X 60T 10ATB MITER/TABLE SAW BLADE $33.00